Download Print this page
   

Advertisement

Q
uick Start Guide
D-Link DG-102S iPhone Device
Please Note:
This guide covers the two most common setups. Please visit
for advanced network configurations.
Package Contents
1
3
1
D-Link DG-102S iPhone Device
2
Power Adapter
3
Ethernet Cable
4
Serial Cable
Important:

2
3
If your network looks like this...
High Speed Modem
Go to page 2
Page 
2
4
Start Here
You must register your account and activate your iPhone online prior to set-up.
Please go to
www.comwave.net/register
ID and the contact telephone number you provided to Comwave upon
ordering the iPhone.
Once you have registered, go to
in with your new user name and password. Click on the
link in the left menu and follow the instructions.
Continue below with set-up instructions.
Your Computer
www.comwave.net/setup
iPhone Connections
1
2
1 Power Connection
2 Serial Cable
Used only if instructed by
Comwave Technical Support
to assist with troubleshooting.
3 WAN
Used to connect to the High
Speed Internet modem or router.
4 LAN
Used to connect to your PC.
5 Phone 1
This is phone line 1. A telephone
number will be assigned to this port.
Used to connect the telephone.
and log in with your Customer
www.comwave.net/myaccount
If your network looks like this...
High Speed Modem
Router
Go to page 6
3
4
5 6 7
6 Phone 2
This is phone line 2. Used to
connect a second telephone, if
subscribed to two phone lines.
7 Life Line
NOTE:
Dial "#" to activate this port.
Used to:
a)
Connect to an existing phone
jack to access the building
intercom functions in apartment
buildings.
b)
Connect to a back-up non-VoIP
land line in the event of Internet
loss, if a back-up line is available.
and log
"Activate
iPhone"
Your Computer

Advertisement

   Also See for D-Link DG-102S

   Related Manuals for D-Link DG-102S

   Summary of Contents for D-Link DG-102S

  • Page 1: Start Here

    Start Guide D-Link DG-102S iPhone Device Please Note: This guide covers the two most common setups. Please visit www.comwave.net/setup for advanced network configurations. Package Contents iPhone Connections 5 6 7 1 Power Connection 6 Phone 2 2 Serial Cable This is phone line 2.

  • Page 2

    Typical Installation (No Existing Router) high speed internet modem step step existing cable or phone line step step step step telephone power outlet To begin installation, turn off your computer and disconnect the power adapter to your high speed modem. step Connect an Ethernet cable from the high speed modem to the port of the iPhone...

  • Page 3

    Installation with a DSL modem (No Router) NOTE: Some DSL providers issue a user name and password to connect to the internet. Some do not. Please call your Internet Service Provider before continuing to ask them if you require a user name and password (PPPoE). Start your computer, open a browser window, type “http://192.168.122.1:8089”...

  • Page 4

    Installation with a DSL modem (No Router) - Cont’d In the main window (under the section called “PPPoE Settings”), ensure that the dropdown menu is “enabled” . Fill in the user name and password provided by your Internet Service Provider. It is important to be very accurate. The user name and password are case sensitive.

  • Page 5

    Installation with a DSL modem (No Router) - Cont’d In the main window, click on the “Save Configuration” button. This will restart your iPhone. Please wait approximately 2 minutes for service to begin. The iPhone Status light will blink until it has successfully connected to the Comwave network. Once the status light becomes solid green, the iPhone is ready for use.

  • Page 6

    Installation with a Router step high speed internet modem step existing router cable or phone line step step step step step power outlet telephone To begin installation, turn off your computer and disconnect the power adapters to your high speed modem and router. step Connect an Ethernet cable from the high speed modem to the port of the router.

  • Page 7

    Notes...

  • Page 8

    Have more questions? Live and personal Customer Care is available when you need it with our extended hours. Our Technical Support team is available: Monday - Friday 8:30 am - 12 am Saturday 10 am - 6 pm Sunday 12 am - 6 pm...

Comments to this Manuals

Symbols: 0
Latest comments: