D-Link DPN-144DG User Manual page 180

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
Disable Hot Line
Enable Hot Line
Enable alarm clock
Disable alarm clock
To change parameters of a code, select the relevant line in the table.
Figure 132. The VoIP / Call Feature Codes page. The window for editing the code parameters.
In the opened window, specify the needed parameters:
Parameter
VSC
Line 1 / Line 2
Disables the hotline.
Enables the hotline.
Enables the alarm clock for the time specified for this
line.
Disables the alarm clock.
The value of the code. If the code ends with * (the asterisk key),
further you can enter a value for the function in use (a number for
call forwarding or time for the alarm clock). For example, the code
for enabling the alarm clock: *55*HHMM#, where HHMM is time
in 24-hour format.
Edit from Phone
Move the switch of the relevant line to the right to enable the code
for the phone connected to the FXS port of the gateway.
Move the switch of the relevant line to the left to disable the code
for this phone.
Page 180 of 217
Configuring via Web-based Interface
Description
Description