D-Link DPN-144DG User Manual page 157

Gpon ont dual band wireless ac1200 voip gateway with 1 gpon port, 4 10/100/1000base-t ports, 2 fxs ports, and 1 usb port
Hide thumbs Also See for DPN-144DG:
Table of Contents

Advertisement

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
The maximum
number of failures
DPD
TCP MSS
TCP MSS Value
Allow traffic between
tunneled networks
A number of DPD messages that were sent to check the status of a
remote host and left unanswered. By default, the value 3 is specified.
If a remote host does not answer the specified number of messages,
the gateway breaks down the tunnel connection, removes the
encryption keys, and tries to activate the connection.
Maximum Segment Size of a TCP packet. This parameter influences
the size of a TCP packet which will be sent from a remote host to the
gateway.
If the Manual value is selected, you can specify the parameter in the
TCP MSS Value field.
If the Path MTU discovery value is selected, the parameter will be
configured automatically.
The maximum size (in bytes) of a non-fragmented packet. The field is
available for editing when the Manual value is selected from the TCP
MSS drop-down list.
Move the switch to the right to allow data exchange between subnets
with which IPsec tunnels have been created.
Page 157 of 217
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

Table of Contents