Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Basic Settings
On the USB modem / Basic Settings page, you can view data on the USB modem connected to
the gateway and enable/disable the function for automatic creation of 3G/LTE WAN connection
upon plugging a USB modem into the gateway.
If the Automatic creation of connection switch is moved to the right and the PIN code check
for the SIM card inserted into your USB modem is disabled, then an active WAN connection with
default settings (for LTE modems) or the operator's settings (for GSM modems) will be
automatically created when plugging the USB modem into the gateway. The connection will be
displayed on the Connections Setup / WAN page.
If you don't want to use this function, move the Automatic creation of connection switch to
the left and click the APPLY button.
When a USB modem is connected to the gateway, the following data are displayed in the
Information section:
Parameter
Vendor
Model
Revision
IMSI
IMEI
Figure 96. The USB modem / Basic Settings page.
The manufacturer of your USB modem.
The alphanumeric code of the model of your USB modem.
The revision of the firmware of your USB modem.
The code stored in the SIM card inserted to your USB modem.
The code stored in the memory of the USB modem.
Page 127 of 217
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
