Creating Pptp Or L2Tp Wan Connection - D-Link DPN-144DG User Manual

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual

Creating PPTP or L2TP WAN Connection

To create a connection of the PPTP or L2TP type, click the Add button on the Connections
Setup / WAN page in the Connections List section. On the opened page, go to the All
Settings tab. Then select the relevant value from the Connection type drop-down list and
specify the needed values.
Figure 47. The page for creating a new PPTP connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 64 of 217
Configuring via Web-based Interface
Description