Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
USB Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the relevant
notification will be displayed in the top right corner of the page.
Click the ENTER button. When the USB Modem / PIN page opens, enter the PIN code in the
Authorization section
APPLY button.
Some USB modems in the router mode and Android smartphones in the modem mode have an IP
address from the subnet which coincides with the gateway's local subnet. In this case, the gateway's
web-based interface can be unavailable. For correct operation, disconnect the device from the USB
port and reboot the gateway. Then access the web-based interface, go to the Connections Setup /
LAN page, and change the value of the IP address field on the IPv4 tab (for example, specify the
value 192.168.2.1). Wait until the gateway is rebooted.
* For correct operation of USB modems you may need to update the gateway's firmware.
15 For some models of LTE USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the gateway.
Figure 94. The notification on the PIN code check.
15
.
Click the Show icon (
Figure 95. Entering the PIN code.
Page 126 of 217
*
) to display the entered code. Then click the
Configuring via Web-based Interface
Advertisement
Table of Contents
