Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
To use a number specified in the Abbreviated Dial section, dial the needed short number on the
phone set.
In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the
Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule. You
can specify several rules separated by the character | (vertical bar). You can use digits (0-9), the
characters * (asterisk) and # (pound), and the following characters:
Parameter
[]
X
.
<>
In the Misc section, fill in the PIN code to dial field to allow the user of the phone to make calls
only after dialing the PIN code.
When all needed settings are configured, click the APPLY button.
Digits and/or the characters * and # within square brackets specify a
range of values for a certain position in the number.
Any digit, the character * or #.
Any number of repetitions (including none) of the previous digit or
character.
Angle brackets containing digits separated by : (colon) allow to
substitute the digit after the colon for the digit before the colon.
Page 178 of 217
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
