DPN-144DG
Configuring Connection to the Internet
When the gateway connects to a fiber optic line, a WAN connection is
created and configured automatically.
When the gateway connects to an Ethernet line or a mobile network,
!
you should configure your WAN connection in accordance with data
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating an LTE WAN connection, go to the
Modem / PIN
If the PIN code check for the SIM card inserted into your USB modem is
disabled, an active LTE WAN connection will be automatically created on the
Connections Setup / WAN
gateway. If the connection has not been created automatically, create a new
connection manually.
!
For the USB modem Megafon M100-1, please reboot the gateway after
creating the WAN connection.
1.
Go to the
2.
Click the
3. On the opened page, on the
the Connection type drop-down list.
* For correct operation of USB modems you may need to update the gateway's
firmware.
*
page and enter the PIN code.
Connections Setup / WAN
ADD
button.
page when connecting a USB modem to the
page.
All Settings
tab, select the
Quick Installation Guide
LTE
value from
USB
19