D-Link DPN-144DG User Manual page 162

Gpon ont dual band wireless ac1200 voip gateway with 1 gpon port, 4 10/100/1000base-t ports, 2 fxs ports, and 1 usb port
Hide thumbs Also See for DPN-144DG:
Table of Contents

Advertisement

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
Allow call without
registration
Backup route
Bound interface name
Enable DHCP
option 120
Local port
Use domain to register
SIP domain name
Move the switch to the right to allow calls without registration on
the main SIP proxy server.
An IP address to which calls will be forwarded if the main or backup
SIP proxy servers are unavailable.
Misc
From the drop-down list, select an interface (the local interface or an
IPv4 WAN connection) which will be used for VoIP.
Move the switch to the right to allow using DHCP option 120. When
the option is enabled, the Address field in the SIP Proxy section
and the Backup SIP proxy address field in the SIP Backup
section are filled in automatically.
The gateway's port used for exchanging data with the SIP server.
Unless another setting is given by your ISP, it is recommended to
leave the default value (5060).
SIP Domain
Move the switch to the right if your ISP requires to specify a domain
name upon registration on the SIP proxy server. Then fill in the SIP
domain name field.
When this field is filled in, the gateway registers on the SIP proxy
server using the specified domain name. When the field is blank, the
gateway uses the IP address assigned to it.
Page 162 of 217
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

Table of Contents