Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
The following elements are available on the page:
Parameter
IGMP
SIP
RTSP
PPPoE pass through
IPsec pass through
L2TP pass through
PPTP pass through
After specifying the needed parameters, click the APPLY button.
16 On the Connections Setup / WAN page, create a WAN connection, move the SIP switch to the right on the
Advanced / IGMP/ALG/Passthrough page, connect an Ethernet cable between a LAN port of the gateway and
the IP phone. Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically (as
DHCP client).
Select a version of IGMP from the drop-down list. Such a setting
allows to enable multicasting from the WAN connection selected in
the IGMP section on the Connections Setup / WAN page.
Move the switch to the right to enable SIP. Such a setting allows
using the SIP ALG function. This function allows VoIP traffic to
pass through the NAT-enabled gateway.
Move the switch to the right to enable RTSP. Such a setting allows
managing media stream: fast forward streaming audio/video, pause
and start it.
Move the switch to the right
function.
Move the switch to the right
function.
Move the switch to the right
function.
Move the switch to the right
function.
Page 153 of 217
Configuring via Web-based Interface
Description
16
to enable the PPPoE pass through
to enable the IPsec pass through
to enable the L2TP pass through
to enable the PPTP pass through
Advertisement
Table of Contents
