Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
Registration expire
timeout
Registration retry
interval
Session expires
Enable
Server address
Port
Codec
Payload type
Flash type
Registration
A time period (in seconds) after which the gateway changes the
registration status in case of no response from the SIP proxy server.
A time period (in seconds) after which the registration will be
repeated.
A time period (in seconds) between attempts to check the status of
the voice session.
STUN Server
Move the switch to the right to enable the STUN client (Session
Traversal Utilities for NAT). The STUN client sends requests to a
STUN server. On the basis of the received replies, the client allows
VoIP traffic to pass through the NAT-enabled gateway. If the switch
is moved to the right, the Server address and Port fields are
available for editing.
An IP or URL address of a STUN server to which a connection is
established.
A port of a STUN server to which a connection is established. By
default, the port 3478 is specified.
RTP Redundancy
The RTP Redundancy function allows restoring a part of lost RTP
packets while transmitting audio data.
From the drop-down list, select a codec to which the function should
be applied.
To disable the function, select the None value from the drop-down
list.
Payload data type.
Flash Settings
The FLASH action type.
Transfer: switching between calls.
•
SIPInfo: sending a service message to the SIP server. The
•
value is available if the SIPInfo value is selected from the
DTMF relay setting drop-down list.
Page 166 of 217
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
