Mac Filter - D-Link DPN-144DG User Manual

Gpon ont dual band wireless ac1200 voip gateway with 1 gpon port, 4 10/100/1000base-t ports, 2 fxs ports, and 1 usb port
Hide thumbs Also See for DPN-144DG:
Table of Contents

Advertisement

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual

MAC Filter

On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers
of the gateway's LAN.
Select the needed action from the drop-down list in the Default mode section to configure
filtering for all devices of the gateway's network:
Allow: Allows access to the gateway's network and to the Internet for devices (the value is
specified by default);
Deny: Blocks access to the gateway's network for devices.
!
You can use the Deny mode only if an active rule which allows access to the device's
network is created on the page.
To create a rule (specify a MAC address of a device for which the specified filtering mode will be
applied), click the ADD button.
* For correct operation of MAC filter you may need to update the gateway's firmware.
*
Figure 141. The Firewall / MAC Filter page.
Figure 142. The window for adding a rule for the MAC filter.
Page 193 of 217
Configuring via Web-based Interface

Advertisement

Table of Contents
loading

Table of Contents