Chapter 4. Configuring Via Web-Based Interface; Initial Configuration - D-Link DPN-144DG User Manual

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration

To start the initial configuration, go to the Initial Configuration section. On the opened page,
click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the gateway via Wi-Fi connection, please make sure that you
are connected to the wireless network of DPN-144DG (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 18. Restoring the default settings.
Figure 19. Checking connection to the wireless network.
Figure 20. The initial configuration page.
Page 36 of 217
Configuring via Web-based Interface
VIA WEB-BASED