Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
VLAN
On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks
(VLANs).
By default, 2 groups are created in the gateway's system:
lan: it includes ports 1-4. You cannot delete this group.
•
wan: for the WAN interface; it includes the PON port. You can edit or delete this group.
•
If you want to create a group including LAN ports of the gateway, first delete relevant records from
the lan group on this page. To do this, select the lan group. On the opened page, in the Untagged
Ports section, deselect the checkbox located to the left of the relevant port, and click the APPLY
button.
To create a new group for VLAN, click the Add button.
You can specify the following parameters:
Parameter
Name
Enable
Figure 99. The Advanced / VLAN page.
Figure 100. The page for adding a group of ports for VLAN.
A name for the port for easier identification.
Move the switch to the right to allow using this group of ports.
Page 131 of 217
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
