Creating 3G Wan Connection - D-Link DPN-144DG User Manual

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual

Creating 3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, go to the USB Modem / PIN page and enter the PIN code (see
the USB Modem section, page 126). Then go to the Connections Setup / WAN page and click
the Add button in the
Then select the relevant value from the Connection type drop-down list and specify the needed
values.
Figure 55. The page for creating a new 3G connection. Selecting a connection type.
Parameter
Enable connection
Connection name
* For correct operation of USB modems you may need to update the gateway's firmware.
*
Connections List section. On the opened page, go to the All Settings tab.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 74 of 217
Configuring via Web-based Interface
Description