Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
MAC Filter
On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
Figure 80. The page for configuring the MAC filter for the wireless network.
By default, MAC filtering is disabled.
To open the basic or additional wireless network of one or both bands for the devices which MAC
addresses are specified on this page and to close the wireless network for all other devices, in the
section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
In the opened window, move the Enable MAC filter switch to the right. Upon that the MAC filter
restrict mode drop-down list will be displayed. Select the Allow value from the drop-down list
and click the SAVE button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the Deny value from the MAC filter restrict mode drop-down list and click the SAVE
button.
Click the ADD button to add a rule for MAC filtering.
Page 110 of 217
Configuring via Web-based Interface
Advertisement
Table of Contents
