Speed Dial; Caller Filter; Acl For Management - D-Link DVG-4088S User Manual

Speed Dial

This system can set up 100 numbers for speed dialing. Setting methods are as follows:
Method 1- Single mapping: Fill a short code into the "
desired phone number into the "
For example, pick up the handset and dial 55＃ and the system will dial 32568791.
Method 2- Multi mapping; Fill the prefix code into the "
into the "
Number To Dial
For example, pick up the handset and dial 301＃, and the system will dial 521301.
If the user dial 00 1657987456321, the system will DIAL 856 1657987456321

Caller Filter

This function is used at allow or deny SIP Invite from the Proxy list ONLY.
Filter IP Address: Fill up with the start IP you would like to allow/deny.
Subnet mask: Fill up with the subnet mask you would like to allow/deny.

ACL for Management

You can use ACL to allow the user that is from some IP address to enter Web.
Enable ACL for Management: Enable ACL for Management if ticked.
Filter IP Address: Fill up with the start IP you would like to allow.
Subnet mask: Fill up with the subnet mask you would like to allow.
Number To Dial
" column.
" column, and enter the
Speed Dial Code
" column.
" column and the format to transfer
Speed Dial Code
36