Configure Ringer Settings; Audio/Visual Indications; Display Static Phone Information - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

Configure Ringer Settings

Audio/Visual Indications

This setting is used to setup Alert Indications that can be used to differen-
tiate between call types.
Parameter
Alert Indications

Display static Phone Information

Parameter
MAC Address
Application
Version
SIP Stack
Version
SIP Signalling
Version
RTP Version
94
Phone path
(Menu
- 11=Ringer Settings
page 163
- 01=Alert indications
- 01=Indication 1 up to
- 15=Indication 15
(change identifier, select
alert type and enter ringer
melody and tone)
This feature is only supported in specific system environments.
Phone path
(Menu
- 07=General info
page 202
- 1=MAC address
- 07=General info
- 2=Version Info
page 228
- Application
- 07=General info
- 2=Version Info
page 217
- SIP stack
- 07=General info
- 2=Version Info
page 217
- SIP signalling
- 07=General info
page 212
- 2=Version Info
- RTP
Web Interface path
page 148) (Menu
- Ringer Settings
(enter alert indication string and
enter melody, tone and duration)
Web Interface path
page 148) (Menu
- General information
(MAC address)
- General information
- Versions
(Application)
- General information
- Versions
(SIP stack)
- General information
- Versions
(SIP signalling)
- General information
- Versions
(RTP)
page 110)
page 110)