Making Settings For Voip Telephony - Siemens Gigaset S450 IP Manual

Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: You have registered
(e.g. via your PC) with such a VoIP provider
and set up at least one VoIP account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u
Your user name with the VoIP provider,
if this is required by the VoIP provider
u
Your registration name
u
Your password with the VoIP provider
u
VoIP provider general settings
The connection assistant will help you
with the settings.
Starting the connection assistant
Precondition: The base station is con-
nected to the mains power supply and the
router. Your router is connected to the
Internet (page 9).
Tip: If is activated as the default
VoIP
connection for your phone (default set-
ting page 29), the phone will attempt to
make a direct connection to the server
belonging to your VoIP provider after the
connection assistant is closed. If incorrect/
incomplete information means that the
connection cannot be made, messages
will be displayed (page 11).
Note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to "recognise" the phone, dynamic IP
address assignment must also be activated on
the router, i.e. the router's DHCP server is acti-
vated.
As soon as the handset battery is suffi-
ciently charged, the message key f on
the handset will flash (around 20 minutes
after you have put the handset in the
charging cradle). Press the message key
f to start the connection assistant.
You will see the following display:
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes
Press the display key to start
§Yes§
the connection assistant.
The settings are carried out in
several steps.
~
Enter system PIN (the default
setting is "0000").
Note:
The connection assistant will also start auto-
matically if you try to establish a connection
via the Internet, before you have made the
necessary settings.
You can also call up the connection assistant at
any time via the menu (page 13).
Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
After a short time the following is dis-
played:
Select Country
Germany
England
France
Netherlands, the
Ý
q
Select country (press up/down
on the control key) and press
First Steps
OK
10