Web Interface; Establishing The Connection To The Phone - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Web Interface

Web Interface

Establishing the Connection to the Phone

You can display and configure device and network information for the
optiPoint 410/420 /economy/economy plus/standard/advance S V7 .0 and
the optiPoint 410 entry S V7 .0 through the Web Interface.
You can access the Web Interface using one of the following web brows-
ers:
• Microsoft Internet Explorer (recent version recommended)
To access the Web Interface, perform the following steps.
Open a web browser and enter the URL of the web page for the phone as
follows:
https://[address]
where [address] is the IP address or host name of the Phone.
You can access the web interface in the browser using the host name as-
signed to your telephone. The presetting for the host name is the current
E164 number. An example for the browser call is:
https://hostname.domainname
For configuring the phone's IP address see chapter "Basic Administration"
on page 48.
For example, the configuration page for the Phone with the IP address
192.168.1.137 is: "https://192.168.1.137".
If applicable, confirm the following advisory message with "Yes":
109