Configuring Date and Time
If the DHCP server in your network provides information about the SNTP
server access, the date and time is automatically shown on the phone.
If the DHCP server in your network does not provide a SNTP address you
have to set the SNTP address manually.
If no SNTP server is in your network you have to configure the date and
time manually.
If SNTP is being used, any user specified value for Time and Date
will be overwritten when the next SNTP update occurs!
SNTP is available, but no automatic access by DHCP server
Phone path
Parameter
(Menu
SNTP Address
- 04=Date/Time
page 219
- 1=SNTP IP addr
(change IP address
Timezone Offset
- 04=Date/Time
page 225
- 2=Timezone offset
(change timezone offset)
1
or host name (if DNS is applicable
No SNTP server available
Phone path
Parameter
(Menu
Y
Date/Time
- 2=Configuration
page 173
- 03=Date/time
(select a date format and
change date and time)
Y
Daylight Saving
Time
- 2=Configuration
- 14=Daylight Saving
page 174
(switch on/off)
Web Interface path
page 148)
(Menu
- Time and date
- SNTP server IP address or DNS
1
)
name
(enter IP address
- Time and date
- Time zone offset
(enter timezone offset)
page 41)
Web Interface path
page 148)
(Menu
- Time and date
- Local time/Date
(enter Local time, enter/select
Date)
- Time and date
- Daylight saving
(activate/deactivate checkbox)
Extended Administration
page 110)
*
)
page 110)
67