Optipoint 410 Entry - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Step by Step

optiPoint 410 entry

Configuration using DHCP Server
The optiPoint 410/420 is factory-configured to have an
IP address automatically assigned to it by the DHCP
server as soon as it's connected to LAN.
The Authentication is done via digital Certificates.
For detailed informationen refer to the IEEE
802.1x Configuration Management Administra-
tion Manual.
If your network use a DHCP server, the telephone will
try to get its IP Address, IP Address Mask, SIP Address-
es (server, gateway, registrar), SNTP Server Address
Configuration Download Server Address and Time Off-
set from the DHCP server (completely list see
page 38).
In this case the following parameters have to be config-
ured using the Web Interface Administrator Menu.
Parameter
Terminal Number
page 224
SIP User ID
page 218
SIP Password
page 215
Language
Basic Administration
Web Interface path
(Menu page 110)
- SIP environment
- Terminal number
(enter terminal number)
- SIP environment
- SIP user ID
(enter ID)
- SIP environment
- New/Confirm SIP password
(enter/re-enter password)
WBM user interface
53