User-Assisted Diagnostic Tests; Security Settings - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

User-assisted diagnostic tests

These types of diagnostic tests require a local user to confirm the result at
the optiPoint 410/420.
Parameter
Display test
LED test
Key test
Audio loop test
Line monitor
Key Label Test

Security settings

Parameter
Payload Security
allowed
Connectivity
check interval
SIP Server
Validate
96
Once a particular test has been started, the local user will assume
full control of the test (using the keypad) until the test is terminated.
Phone path
(Menu
>
page 182
- 01=Display test
>
page 196
- 02=LED test
>
page 193
- 03=Key test
>
page 165
- 04=Audio loop
>
page 198
- 08=Line monitor
>
page 213
- 13=Key Label Test
Phone path
(Menu
- 02=System
- 47=Payload Security All
page 206
(Switch off/on)
- 02=System
- 48=Conn.Check Interval
page 173
(enter value)
- 02=System
- 49=SIP Server Validate
page 216
(Switch off/on)
Web Interface path
page 148) (Menu
- User-assisted diagnostic tests
- Display test
- User-assisted diagnostic tests
- LED test
- User-assisted diagnostic tests
- Key test
- User-assisted diagnostic tests
- Audio loop test
- User-assisted diagnostic tests
- Line monitor
- User-assisted diagnostic tests
- Self Labelling keys test
Web Interface path
page 148) (Menu
- Security Settings
- Payload Security allowed
(mark as allowed)
- Security Settings
- Connectivity check interval
(enter value)
- Security Settings
- SIP server validation
(mark as enabled)
page 110)
page 110)