Multiline; Line Key Configuration - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

Multiline

Line key configuration

In line overview menu you can configure lines and an assign lines to keys.
It suffices to assign one line to a key for to go in multiline operation.
Parameter
Line
Key Label
Address of
record
Realm
Primary line
Ring
68
Phone path
(Menu
(not applicable)
page 196
(not applicable)
page 192
(not applicable)
page 199
(not applicable)
page 201
(not applicable)
page 201
- 02=System
page 201
- 28=Keyset
- 01=Line
select a line
- 2=Ringer setting
(Read only)
Web Interface path
page 148) (Menu
- Funcktion keys
- Phone
or
- Key module
- Select a key with EDIT
a configuration dialog appears
- Select:line
(A key with line is ready for con-
figuring)
Line key configuration dialog
- Key Label
(enter a name for the line key –
only with optiPoint 420)
Line key configuration dialog
- Address of record
(enter e.g. phone number)
Line key configuration dialog
- Realm
(enter IP address)
Line key configuration dialog
- Primary line
(mark as primary if required)
Line key configuration dialog
- Ring
(enable/disable)
page 110)