Extended Administration
Parameter
FTP Passive
Mode
1
Upload Configuration File
The optiPoint 410/420 allows you to upload the phones configuration file.
Uploading will be done in the binary format to the FTP download server
with its common settings. The fixed name of file which will be uploaded is
opti400c without an extension.
Parameter
Upload
Configuration
Downloading Files
If you want to download files (application, configuration, hold music) you
can either browse through the menu structure on the FTP server (phone
menu only) or specify this filename before download.
Download files using the phone menu without setting a filename
The FTP-Client on the optiPoint 410/420 does support a user dialog for se-
lecting a file for download. The mechanism can be triggered by omitting
the download file name and starting the download.
For example if the application download file name is not set and download
application is selected (
file]), the phone will establish connection to the FTP-Server.
Example of information provided on the display:
.5
op400a1
Upper left corner: current folder or file,
upper right corner: number of sub-folders and files,
lower left corner: selected folder or file (e.g. "op400a"),
lower right corner: number of current folder or file.
A dot (".") means the current folder, double dot ("..") means the superordi-
nately folder.
< >
Press this keys to browse in the current folder.
76
Phone path
(Menu
- 03=File transfer
- 25=Use Passive Mode FTP
page 187
(select switch on/off)
or host name (if DNS is applicable
Phone path
(Menu
- 03=File transfer
- 03=UL config
page 227
Web Interface path
page 148)
(Menu
- File transfer
- Use Passive Mode FTP
(mark to use)
page 41)
Web Interface path
page 148)
(Menu
- File transfer
(submit with "upload configu-
ration)
- Upload configuration
> 03=File transfer > [required type of download
page 110)
page 110)