Mobility International Id; Originating Line Preference - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Alphabetical Reference

Mobility International ID

If this function is activated, the Mobility ID entered is completed using val-
ues from the Dialing Properties Table for the registration. This is only done
if the ID entered does not exceed 6 digits. See also

Originating line preference

Originating Line selection – provides connection of the phone to one of the
lines appearing on it, on an automatic basis when the user goes off-hook
or starts on-hook dialing. There are four originating options.
A Keyset is assigned one of the following preferences.
•
•
•
•
Select the according line preference:
204
page 102 page 134
Prime Line Preference – The designated Prime Line is always select-
ed for originating calls.
Idle Line Preference – Any idle line is selected for originating calls with
the lines selected based on line selection table for the device (e.g.,
prime line first). See also line rank on
preference on page 224.
Last Line Preference – The line selected for originating calls is the line
selected for the last call (originating or terminating).
No (Originating) Line Preference – A line key must be pre-selected
or post-selected each time the user goes off-hook.
– Idle line
– Primary
– Last
– None
page 69 page 123
page 181
page 199 and Terminating line