Sip Routing; Sip Server Type; Sip Server Validation; Sip Session Timer Value - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Alphabetical Reference

SIP routing

•
•

SIP server type

•

SIP server validation

If this function is activated, a server certificate is requested and validated
during the HiPath 8000 registration.

SIP session timer value

•
•
•
216
When "Server" is selected, the phone will send REGISTER messages
to the Registrar server, whose address is in the SIP Registrar field.
If "Gateway" is selected, the gateway address of e.g. a hardware box is
used to phone into the public network (direct conversion of SIP to
TDM). When The phone will not send REGISTER messages.
Routing type Use
Server If a SIP proxy server is used.
Gateway If a gateway is used.
page 62 page 115
Select the according server type:
– HiQ8000
– Broadsoft
– Sylantro
– Other
page 62 page 115
page 96 page 144
The expiration time for the session is set via the system/SIP Session
Time value. This value is ignored if the SIP Session Timer is not en-
abled. The RFC standard defines a Minimum expiry time which is 90
sec. For detailed information see
Value range table:
Permitted values
Range
Dafault value
Editing by phone: Number Editor
page 62 page 115
RFC 4028
numeric
90 ... 3600 seconds (recommended: 1800)
3600 seconds
page 157.
paragraph 4.