Time Zone Offset; Timer High Priority; Timer Medium Priority; Transaction Timer - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Time zone offset

• The specification describes the shift in hours corresponding to the time
zone information of the SNTP server.
• Make an entry only if an
tion.
• Value range table:
Permitted values
min.
max.
Default value
• Editing by phone: Offset Editor
page 67

Timer High Priority

Set the delay in seconds after the last high priority item change before sav-
ing the changes to the DLS.
• Causes time out before saving high prioity user data.
• Vaulue range: 0 to 999
page 102

Timer Medium Priority

Set the delay in seconds after the last medium priority item change before
saving the changes to the DLS. Used in confjunction with the Medium Pri-
oity peg count threshold.
• Timeout before saving medium priority user data
• The value has to be a number in the range 1 to 999
page 102

Transaction timer

The Transaction Timer sets the amount of time that the phone will wait for
a response to any SIP request that it sends. The time value is in millisec-
onds and the user can enter any value between 3000 and 32000. The de-
fault value is 32000 milliseconds.
page 66
SNTP server provides time zone informa-
numeric
-12
+12
0
page 161.
page 120
page 134
page 134
page 115
Alphabetical Reference
225