Minimum Clearance Requirements - Allen-Bradley 8720MC-RPS065 User Manual

Chapter 2 Plan and Mount the 8720MC-RPS Installation
8720MC Regenerative Power Supply
(8720MC-RPS065 unit is shown)
150 mm
(5.9 in.)
18

Minimum Clearance Requirements

150 mm
(5.9 in.)
150 mm
(5.9 in.)
150 mm
(5.9 in.)
IMPORTANT Mount the 8720MC-RPS unit in an upright position as shown. Do not mount
the module on its side.
Refer to Product Dimensions
dimensions.
ATTENTION: The temperature inside the cabinet must be kept below 50 °C
(122 °F). Because the 8720MC-RPS unit dissipates large amounts of heat,
exercise special caution for exhausting air. Take into account heat dissipation
for all units when sizing the enclosure and providing ventilation.
Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
Air Flow
Air Flow
on page 111 for 8720MC-RPS mounting