Command-Line Options - Matrix Vision mvHYPERION-Series Technical Manual

94

9.1.3 Command-line options

It is possible to start wxPropView via command line and controlling the starting behavior using parameters. The
supported parameter are as follows:
Parameter
width or w
height or h
xpos or x
or
ypos y
splitterRatio
or
propgridwidth pgw
or
debuginfo di
dic
displayCountX or dcx
displayCountY or dcy
fulltree or ft
device or d
Figure 52: wxPropView - Setting TriggerDelay
Description
Defines the startup width of wxPropView. Example:
Defines the startup height of wxPropView. Example:
Defines the startup x position of wxPropView.
Defines the startup x position of wxPropView.
Defines the startup ratio of the position of the property grids splitter. Values be-
tween 0 and 1 are valid. Example: splitterRatio=0.5
Defines the startup width of the property grid.
Will display debug information in the property grid.
Will display invisible (currently shadowed) components in the property grid.
Defines the number of images displayed in horizontal direction.
Defines the number of images displayed in vertical direction.
Will display the complete property tree (including the data not meant to be
accessed by the user) in the property grid. Example (Tree will be shown)
: fulltree=1
Will directly open a device with a particular serial number.
device. Example:
d=GX000735
CONTENTS
width=640
height=460
will take the first
MATRIX VISION GmbH