17.4 Working with an rotary encoder
As described in Working with pulse start events (p. 123) the mvHYPERION features two HRTC's (PulseStart
Configuration0 and PulseStartConfiguration1), which also features a Rotary Decoder (p. 124).
Figure 3: wxPropView - Selecting RotaryDecoder as PulseStartTrigger in PulseStartConfiguration0
The Rotary Decoder (p. 124) offers some parameters:
• DigitalSignalA (p. 125)
• DigitalSignalB (p. 125)
• PulseMultiplication (p. 126)
• Direction (p. 126)
• Mode (p. 126)
• int Reset() (p. 127)
17.4.1 DigitalSignalA
The first data line of the rotary encoder.
17.4.2 DigitalSignalB
The second data line of the rotary encoder.
MATRIX VISION GmbH
125
Need help?
Do you have a question about the mvHYPERION-Series and is the answer not in the manual?