Matrix Vision mvHYPERION-Series Technical Manual page 86

82
Figure 38: wxPropView - After invoking the "Import" command of a camera description
9.1.2.4.1 Configuring an unknown camera
If you need a camera description (p. 71) of an unknown CameraLink or SDI camera, wxPropView (p. 48) supports
you with three properties, which can be found in "Info -
• DataCycleCounterLine0
• DataCycleCounterLine1
• LineCounter
For line scan cameras, the property DataCycleCounterLine0 is enough to know.
Camera":
CONTENTS
MATRIX VISION GmbH