Matrix Vision mvHYPERION-Series Technical Manual page 36

32
2
3
4
5
6
7
8
Recommended plugs for 8-pin Binder series 711:
• 711: Binder ordering no. 99-0479-100-08 / 99-0479-102-08
Detailed information: http://www.binder-connector.de
8.1.2.6 Pinning J5 (Power supply (floppy))
You can connect a free power supply cable for floppy drives on connector J5 to increase the available current on the
power supply pins on J3 and J4 to 2A.
8.1.2.7 Pinning J6 (internal digital I/Os)
Pin
1..5
6
7
8
9..12
13..16
17
18
19
20
Strobe-Out2 (+) - Collector
Strobe-Out2 (-) - Emitter
Trigger-In2 (+) - Anode
Trigger-In2 (-) - Cathode
Sync-In2 (+) - Anode
Sync-In2 (-) - Cathode
GND (camera power)
Pin Signal
1 +12 V
2 Ground
3 Ground
4 Not connected
Figure 9: J6
Signal
used internally (do not connect!)
Ground
+5V out
+3.3V out
GPIN0..3
GPOUT0..3
Ground
+12V DC Out
+12V DC Out
Ground
White
Brown
Green
Yellow
Gray
Pink
Blue
Signal direction
Ground
+5V DC power supply
+3.3V DC power supply
LVTTL(3.3V) input.
not 5V tolerant!
LVTTL(3.3V) output.
not 5V tolerant!
Ground
+12V DC power supply
+12V DC power supply
Ground
CONTENTS
MATRIX VISION GmbH