Matrix Vision mvHYPERION-Series Technical Manual page 123

15.3 Registering and renaming devices for DirectShow usage
4. Afterwards the column "DirectShow friendly name" will display the newly assigned friendly name.
Note
Please do not select the same friendly name for two different devices. In theory this is possible, however the
mvDeviceConfigure GUI will not allow this to avoid confusion.
15.3.3 Make silent registration
To make a silent registration without dialogs, the Windows tool
The following command line options are available an can be passed during the silent registration:
EXAMPLES:
Register ALL devices that are recognized by mvIMPACT Acquire (this will only register devices which have drivers
installed).
regsvr32 <path>\DirectShow_acquire.ax /s
MATRIX VISION GmbH
Figure 5: mvDeviceConfigure - enter new name
Figure 6: mvDeviceConfigure - renamed device
"regsvr32" via command line can be used.
119