Table of Contents
Advertisement
eBOX800-511-FL-FL Series user's Manual
3.2.1 Restore BIOS Optimal Defaults (JP2)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
Function
Normal (Default)
Restore BIOS optimal defaults
3.2.2 Auto Power On (JP3)
If JP3 is enabled for power input, the system will be automatically power on without pressing
soft power button. If JP3 is disabled for power input, it is necessary to manually press soft
power button to power on the system.
Function
Disable auto power on
Enable auto power on (Default)
22
Setting
1-2 close
2-3 close
Setting
1-2 close
2-3 close
Jumper & Connector Settings
Advertisement
Table of Contents
Need help?
Do you have a question about the eBOX800-511-FL Series and is the answer not in the manual?
Questions and answers