Table of Contents
Advertisement
eBOX800-511-FL-FL Series user's Manual
2.1 Installation of 2.5" SATA Device
Step 1 Turn off the system and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom and then
loosen all screws.
Step 3
Remove the bottom cover.
Note: For 7"mm HDD/SSD, please add a HDD poron before install the
HDD/SSD.
Step 4 Locate SSD/HDD within the red line as marked.
Please notice the direction of connector for HDD.
12
Hardware Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the eBOX800-511-FL Series and is the answer not in the manual?
Questions and answers