Sensor; Removing The Different Width Sensor Pcb (Pcb3); Removing The Sensor (Sr1,Sr2,Sr3) - Canon DADF-AV1 Service Manual

Sensor

Removing the Different Width Sensor PCB (PCB3)

■ Preparation
1. Remove the Inner cover."Removing the Inner Cover" on page 47
■ Procedure
1. Remove the sensor holder [1].
• 3 Screws [2]
2. Remove the Different width sensor PCB [1].
• 1 Connector [2]
• 3 Claws [3]

Removing the Sensor (SR1,SR2,SR3)

■ Preparation
1. Remove the Feed assembly."Removing the Feed Assembly" on page 49
3x
1x
3x
[3]
56
4. Parts Replacement and Cleaning
[1]
[2]
[3] [1] [2]
[3]