4
Parts Replacement and Cleaning Procedure > Sensors > Removing the waste paper full sensor (light emitting/S011(PCB2))
Sensors
Removing the waste paper full sensor (light emitting/S011(PCB2))
2) Remove 1 screw and pull out the connector.
1) Remove the trimmer unit from the
finisher.
3) Remove 2 hooks and remove the waste paper full sensor.
4
Parts Replacement and Cleaning Procedure > Sensors > Removing the waste paper full sensor (light emitting/S011(PCB2))
x2
x1
x1
F-4-56
F-4-56
F-4-57
F-4-57
4-24
4-24