Removing From The Host Machine; Feeder; External Covers; Front Cover - Canon DADF-P1 Service Manual

Feeder
Hide thumbs Also See for DADF-P1:
Table of Contents

Advertisement

3.1 Removing from the Host Machine

3.1.1 Feeder

3.1.1.1 Removing from the Host Machine

1) Turn off the main power switch of the host machine.
2) Open the DADF.
3) Remove the screw [1], and then detach the small cover [2].
4) Remove the screw [1], and then disconnect the ground cable [2].
5) Disconnect the three connectors [3], and then disconnect the ADF harness
[4].
[3]
[5]
When installing, attach the ADF harness [4] so that the cable tie [5] fits
in the groove of the reader rear cover.
6) Remove the two stepped screws [1], slide the ADF [2] toward the rear, and
lift it to detach.
[1]
[2]
F-3-1
[2]
[1]
[4]
F-3-2
[1]
F-3-3

3.2 External Covers

3.2.1 Front Cover

3.2.1.1 Removing the Front Cover
0010-3922
1) Open the feeder cover [1], and then remove the screw [2].
[2]
2) Remove the two screws [3], and then detach the front cover [4].

3.2.2 Rear Cover

3.2.2.1 Removing the Rear Cover

1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
Remove the rear cover with the two claws [3] released.

3.2.3 Feeder Cover

3.2.3.1 Removing the Front Cover
1) Open the feeder cover [1], and then remove the screw [2].
[1]
F-3-4
[3]
F-3-5
[1]
[3]
F-3-6
Chapter 3
0010-3923
[4]
0010-3924
[2]
0010-6189
3-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents