Table of Contents
Advertisement
Installation
Attach the ARMBARDUOG to Your Mounting Surface
There are two ways that you can attach the ARMBARDUOG to a mounting surface:
a Desk-Mount Clamp or a Grommet Mount. The Desk-Mount Clamp ships
preassembled.
Use the Desk Clamp to Attach the ARMBARDUOG
Warning! Ensure that the weight of the Monitors does not exceed the weight capacity
of this product. If you exceed the weight capacity, you may experience personal
injury or damage to your Monitors and ARMBARDUOG. This product can support the
following weight capacities: Up to 8 kg (17.6 lb.) per monitor mount, for a total of 16 kg
(35.2 lb.).
1. Remove the Mounting Cover from the top of the Desk-Mount Clamp. (Figure 1)
Figure 1
Desk-Mount
Clamp
2. Thread the Column through the Mounting Cover that you removed from the Desk-
Mount Clamp.
(Figure 2)
Figure 2
User Manual
Mounting
Cover
7
Column
Mounting Cover
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMBARDUOG and is the answer not in the manual?