Table of Contents
Advertisement
Requirements
Phillips Head Screwdriver x 1
•
Writing Utensil x 1
•
Level x 1
•
Installation
Mounting the Wall Mount
Notes: Product mounting should be completed by a certi-
fied professional as per the local safety and building code
guidelines.
Wall structures vary, and it's important to make sure that the
type of structure and mounting hardware that you're using
will properly support the mounted equipment. Failure to do
so may result in personal injury and/or equipment damage.
Before installing the Wall Mount onto the mounting surface,
1.
contact a professional contractor.
After consulting a professional, the Wall Mount can be
2.
mounted using the Mounting Hardware included.
Note: The provided Mounting Hardware may not be suit-
able for use with all wall structures.
(Optional) While mounting, use Wall Screw Anchors if
3.
required.
Remove the Decorative Caps on the Wall-Mount Bracket
4.
by sliding them off of the ends, before mounting the Wall
Mount.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
12
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMWALLDS2 and is the answer not in the manual?