When User Authentication Is Enabled - Sharp MX-M1100 User Manual

When User Authentication is Enabled

When "User Authentication
When auto login is enabled, the login screen will not appear.
When user authentication is by login name and password (and e-mail
address)
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see "USER AUTHENTICATION" in the User's Guide.
Device Account Mode User Selection
6 12 18
Name 1
Name 3
Admin Login
Name 5
1
Direct Entry
Name 7
Name 9
Name 11
ABC
All Users
User
User Authentication
Login Name
User Name Administrator
Password
Auth to:
Login Locally
2
(1)
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
• In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login
is performed by selecting a user with administrator rights from the user list or by entering a user number with administrator
rights. For more information on login procedures when user authentication is enabled, see "USER AUTHENTICATION" in
the User's Guide.
• To logout...
Press the [LOGOUT] (
(If Auto Clear activates, logout will automatically take place.)
Setting" (page 25) is enabled, follow the procedure below to log in.
Name 2
Name 4
Name 6
Name 8
Name 10
Name 12
ABCD EFGHI JKLMN OPQRST
(2)
) key. (Except when entering a fax number.)
Touch the [Admin Login] key.
Back
1
2
UVWXYZ
Log in.
OK
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
8