Copying In Reverse Order (Reverse Order) - Sharp MX-M1100 User Manual

COPYING IN REVERSE ORDER (Reverse
Order)
With normal copying, the copies are delivered face down in order beginning from the first page, which means that the
copies are in the same order as the pages of the original. When reverse order copying is used, the copies are delivered
face up in order beginning from the first page, which means that the copies are in the reverse order of the original pages.
Originals
1
2
3
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Special Modes
Stamp
2
File
Mixed Size
Original
Press the [START] key (
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key (
3
then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel the reverse order copying...
Touch the [Reverse Order] key in the screen of step 2 so that it is not highlighted.
4
(3) (2)
Original
Image Edit
Count
Reverse
Quick File
Order
Slow Scan
Mode
).
).
Normal copying
4
3
2
1
Select Reverse Order.
(4)
(1) Touch the [Special Modes] key.
OK
☞
SPECIAL MODES
(2) Touch the
2
screens.
2
(3) Touch the [Reverse Order] key so that it is
highlighted.
(4) Touch the [OK] key.
You will return to the base screen of copy mode.
115
Result
Reverse order copying
4
(page 43)
keys to switch through the
). Repeat until all pages have been scanned and
3
2
1