Sharp MX-M1100 User Manual page 385

Address Review
AAA AAA
001
003 KKK KKK
005 MMM MMM
OOO OOO
007
QQQ QQQ
009
011 SSS SSS
4
To
If the transmission includes Cc or Bcc destinations, touch the [Cc] tab or the [Bcc] tab to check those destinations.
To cancel a specified destination...
Touch the one touch-key of the destination that you wish to cancel. A message appears to confirm the cancelation.
Touch the [Yes] key.
☞
CHECKING AND DELETING THE SELECTED DESTINATIONS
Press the [START] key (
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning of one page finishes, replace it with the next page and press the [START] key (
have been scanned and then touch the [Read-End] key.
5
A beep will sound to indicate that scanning is finished.
If Internet fax or fax destinations are included in the broadcast transmission, scanning will take place in Mono2.
To cancel scanning...
Press the [STOP] key (
• A broadcast transmission can be used in combination with the timer transmission function to transmit at night or any other
desired time.
• Fax mode:
Only memory transmission mode can be used for a fax broadcast transmission.
System Settings (Administrator): Fax Dest. Confirmation Mode
When this function is enabled, broadcast transmissions that include fax destinations cannot be performed.
OK
BBB BBB
002
004 LLL LLL 1
2
006 NNN NNN
PPP PPP
008
RRR RRR
010
012 TTT TTT
Cc
).
) to cancel the operation.
Check the destinations and then touch
the [OK] key.
(page 27)
65
). Repeat until all pages