Status Indicators - Sharp MX-M1100 User Manual

STATUS INDICATORS

There are status indicators at the top of the operation panel.
There are both red and green indicators, and these light or blink to indicate the machine's status.
About status indicator lighting and blinking
The status indicators light or blink to indicate the following conditions.
A problem exists but the machine
can be used.
Lights
(The toner cartridge is out of toner
solidly
and the machine is using the spare
toner, etc.)
A problem exists that prevents the
Blinking
machine from being used (out of
toner, paper misfeed, etc.)
Off No problems
The green indicator has two indicating patterns. The indicating pattern can be changed using "Status Indicator Settings"
in the system settings (administrator). The factory default setting is "Pattern 1".
• If solidly lit and blinking states occur simultaneously, the blinking state is given priority.
• When auto power shut-off has occurred, the status indicators turn off.
System Settings (Administrator): Status Indicator Settings
Use this to change the indicator settings of the green status indicator.
Green indicator
Red indicator
Red indicator
Pattern 1
(Job status display)
Job in progress
(During paper feeding and
output.)
Original scanning in progress
Standby
17
Green indicator
Pattern 2
(Machine status display)
Standby
Job in progress
(During original scanning, paper
feeding, and output)
Jobs cannot be accepted