Changing The Subject, File Name, And Body Text - Sharp MX-M1100 User Manual

CHANGING THE SUBJECT, FILE NAME, AND BODY
TEXT
The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can
be selected or text can be directly entered.
• If the subject and file name are not changed, the settings in the Web page are used.
• Selections for the subject, file name, and body text are configured by clicking [Application Settings] and then [Network
Scanner Settings] in the Web page menu.
• For the procedure for entering text, see "7. ENTERING TEXT" in the User's Guide.
Touch the [Send Settings] key in the base screen.
1
☞
BASE SCREEN
Send Settings
Subject
File Name
2
Body Text
Subject
No.01 Sub: Schedule coordination
No.03 Sub: Minutes of planning m
No.05
No.07
3
No.09
No.11
• If you wish to directly enter the text, touch the [Direct Entry] key to open the text entry screen. Enter the text and
touch the [OK] key.
• The text in a pre-set text key can be edited by touching the pre-set text key and then the [Direct Entry] key. The text
entry screen will appear with the selected pre-set text entered. (When a destination is stored using the Web page,
up to 80 characters can be entered. However, only 60 characters* can be edited in the touch panel.)
* When the number of preset keys displayed is 6.
(page 16)
(1)
Cancel
Direct Entry
No.02 Sub: Monthly Schedule
No.04
No.06
No.08
No.10
No.12
To change the subject, touch the
OK
[Subject] key.
Enter the subject.
(2)
(1) Touch a pre-set text key.
OK
(2) Touch the [OK] key.
1
5
51