Tab Copying With A Right Binding - Sharp MX-M1100 User Manual

Tab copying with a right binding

Originals
Originals
1
Final image
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Tab Copy] key.
☞
SPECIAL MODES
Special Modes
Tab Copy
3
Original
Placing the originals
• Document feeder tray
Insert the originals so that the side with no
tab text enters first.
• Document glass
Place so that the side with the tab text is
on the left.
(page 43)
(1)
Cancel
Copy
Image Shift
1/2
(0~5/8)
inch
1
1
Set the tab width.
(2)
(1) Set the image shift width (tab width) with
OK
the
OK
0" to 5/8" (0 mm to 20 mm) can be entered.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
If the [Tab Copy] key for inserts was touched and tab copy
settings were selected, the insert settings screen will
reappear after the [OK] key is touched.
79
Loading tab paper
Load the tab paper so that the tab on the
first sheet is toward you.
keys.
Front
side