Sharp MX-M1100 User Manual page 148

Special Modes
Pamphlet Copy
3
Original
1-Sided 2-Sided
(1)
(2)
Pamphlet Copy
Cover Setting
Paper Tray
Bypass
Tray
11x17
Plain
4
• If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used.
• When the cover paper is fed from the inserter, the cover cannot be copied on.
To cancel cover settings...
Touch the [Cancel] key.
OK
Cancel OK
Left
Right
Binding Binding
Cover
Setting
(2) (3)
(1) (3)
Cancel OK
Print on Cover(2-Sided)
Yes No
(A)
(B)
Select pamphlet copy settings.
(1) If the original is 1-sided, touch the [1-Sided]
key. If the original is 2-sided, touch the
[2-Sided] key.
(2) Select the binding edge ([Left Binding] or
[Right Binding]).
(3) To insert a cover, touch the [Cover Setting]
key.
If you do not want to add a cover, go to step 5.
Select cover settings.
(1) If the cover sheet will be copied on, touch
the [Yes] key. Otherwise, touch the [No]
key.
(2) Select paper settings for the cover.
(A) The currently selected paper tray for the cover is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the cover, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the paper tray for the cover in the
tray selection screen and touch the [OK] key.
Pamphlet Copy
Cover Setting
Inserter(Upper)
1. 8½x11
8½x11
Plain Plain
3. 11x17
Inserter(Lower)
8½x11
4. 8½x14
Plain
(3) Touch the [OK] key.
52
Large Capacity
Paper Tray
Tray
2. 8½x11 5. 11x17
Plain
Plain
6. 11x17
Plain
Plain
7. 11x17
Plain
Plain
OK
Bypass Tray
8½x11
Plain