Sharp MX-M1100 User Manual page 369

(1) (2)
Scan Internet Fax
Address Book
Original
Address Entry Exposure
Send Settings
Resolution
Address Review File Format
Special Modes
File
3
Quick File
The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To
change a setting, touch the appropriate key.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
EXPOSURE MODE (ORIGINAL IMAGE TYPE)
CHANGING THE FILE FORMAT
Internet Fax/Original
Scan Size
Auto
4
2-Sided
2-Sided
Booklet Tablet
The original orientation is initially set to
necessary.
Press the [START] key (
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one
5
page, go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will take place.
If the original was placed on the document glass, replace it with the next original
6 and press the [START] key (
Repeat until all originals have been scanned.
Fax Data Entry USB Mem. Scan
8½x11
Scan: Auto Send:
Auto
200X100dpi
TIFF-F
I-Fax Manual
Reception
(page 81),
(1)
100% Send Size
8½x11 Auto
Image Orientation
).
Display the original settings screen.
(1) Make sure that Internet fax mode is
selected.
Auto
If Internet fax mode is not selected, touch the [Internet fax]
tab.
(2) Touch the [Original] key.
(page 70),
(page 76), CHANGING THE RESOLUTION
4. SPECIAL MODES
Specify the orientation in which the
(2)
original is placed.
OK
When specifying the orientation of the image to be transmitted,
specify the orientation of the original placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
the top edge of the original is to the left, touch the
key.
(2) Touch the [OK] key.
You will return to the screen of step 3.
. If the original was placed with the top edge up, this step is not
).
49
(page 69),
CHANGING THE EXPOSURE AND
(page 87)
SPECIFYING THE
(page 78),
key. If