Sharp MX-M1100 User Manual page 484

• Completed job
Display Status
"Send OK" Transmission was completed.
"In Memory" Reception completed but the fax
has not been printed. (The
received fax is being held by the
print hold function.)
"Printed" Finished printing the received fax
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Number of Broadcast transmission or serial
successful polling completed.
transmission If transmission to 3 destinations
destinations/ was successful out of a total of 5,
Total "003/005 OK" will appear.
destinations
OK"
"No An error occurred because there
Response" was no response from the
destination.
"OK Report" A receive report was requested for
a transmission, the transmission
was completed normally, and the
receive report was received from
the destination.
"NG Report" A receive report was requested for
a transmission, however, the
transmission did not take place
correctly and a transmission failed
report was received.
"No Report" An e-mail was received without an
attached file and thus printing was
not possible.
"Received" An e-mail was received, however,
the attached file was not a TIFF-F
file or there was no attached file,
and thus printing was not possible.
"Rejected" A fax was sent from a party that
has been blocked.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.
"Busy" An error occurred because the
other party was busy.
164